车型,除了标准的功能,包括温度补偿,LED阶梯安培的电表,收取80%的指标,内部预设的“电池类型”开关允许单位要轻松配置与阀控式密封铅酸(胶或AGM)或水淹型(湿)电池。
- 高能量的回报,快速充电
- 恒流第一阶段
- 双电压的限制(循环/待机)
- 比例定时循环充电阶段
- 恒压浮动待机
- 自动安全覆盖定时器
- 启动延时电池连接
- 短期和反向连接器关闭
- 坚固的可控硅相位控制
- 主要零交叉电池传感
- 标准输入:117伏交流电60赫兹
- 恒压阶段按比例定时和温度补偿,最大限度地减少电解质breadkown和气体排放。
- 最后备用浮充将取代站立的损失,并保持在完全充电状态的电池和“准备就绪。”
- 只要连接电池,脱硫电路鼓励击穿硫酸的大型水晶可以在深放电的长期发展。
Models, in addition to the standard features, include, temperature compensation, and LED ladder Amp Meter, an 80% charged indicator and an internal preset ”Battery Type” switch allowing the unit to be easily configured with VRLA (Gel or AGM) or Flooded type (Wet) batteries.
- High energy return, fast charging
- Constant current first stage
- Dual voltage limit (cyclic/standby)
- Proportional timed cyclic charge stage
- Constant voltage float standby
- Automatic safety override timer
- Start delay on battery connect
- Short and reverse connector shutdown
- Rugged SCR phase control
- Main zero-crossing battery sensing
- Standard Input: 117 Volts AC 60 Hz
- Constant voltage stage is proportionally timed and temperature compensated, minimizing electrolyte breadkown and gas emission.
- The final standby float charge will replace standing losses and keep the battery in a fully charged state and “Ready.”
- As soon as the battery is connected, a desulfation circuit encourages the breakdown of large sulfate crystal which can develop during prolonged periods of deep discharge.
技术参数/Specifications
Charger Type | General Purpose |
Performance Specifications | |
Power Source | DC |
Input Voltage | 117 volts |
Frequency | 60 Hz |
Charging Specifications | |
Output Voltage | 12.0 volts |
Method | Constant Voltage |
Batteries Charged | |
Battery Type / Chemistry | Lead Acid (AGM, VRLA) |
Display | LEDs |
Features | Smart Charger; Timer-Based |
专业系列-PS12,10,蓄电池,电池充电器,Professional Series , PS 12/10, Storage Battery Systems, Inc., Battery Chargers